Triangle Pyramid Creations

Horn Toad

In one of my earlier posts I showed you how to fold paper pyramids. In that post I showed you some of the creations you could construct by combing the units. This past week I have been trying to create some paper creatures to show my class Some of the possible things you can make with pyramids.

It Takes Some Patience !

One thing I have learned early on is that it takes a lot of patience and time to create a unique form. Since we have several known creations to use as models found in God’s creations we can try to mimic them or try to capture some of the design features while modifying them to fit our purposes and materials. As I strive to create a believable creature I am reminded how far from the real living thing that my model has achieved. God’s creatures are wonderfully made and designed to function. They are alive! Even though my forms are far from His craftsmanship I can appreciate the creativity and pleasure of creating a form. Here is another of my creations:

The Triangle Tarantula

It’s interesting to consider how each creature is created according to a specific symmetry pattern. In each of these models we see bilateral balance. Each time I added a pyramid element to one side of the figure I had to add one to the opposite side to create balance. As I have studied art and science I have encountered symmetry in every creature formed. Each symmetry type has its advantages. Animals with bilateral symmetry prove be the fastest. Consider the horse, falcon, and cheetah. Animals with radial symmetry, however, are slow moving but able to defend themselves from all sides as well as seek their prey in any direction. Consider the starfish, sea anemone, and sea urchin. As you can see, symmetry plays an important role in all design.

Shape Signifies a Creator

Each building block must be designed to go with the others to fulfill its purpose. In this creation all of the building blocks were triangular. Some were three- sided units while others were four-sided. Notice that they are rigid. Now think of your body. It is also created from building blocks. These are cells. Rather than just two types of building blocks, God has used many. We have skin cells, nerve cells, bone cells, muscle, and more. Rather than being rigid forms these are pliable. They can move, bend, and carry out various functions. And..they are living and able to grow and reproduce more when they have out-lived their usefulness.

On Display for All to See

Each time I share a blog post I am reminded that it will be seen by many. Each person reading a post will have individual responses according to their personalities, worldview, and interests. I love sharing the things I am interested in and for which I have a passion. Think now of God’s creation. What do you think He wants to display to us? In the Book of Romans, chapter one, the Apostle Paul made several interesting statements about creation. The very character of God can clearly be seen in what He has created.

Why Not Try to Make Some Creatures of Your Own?

Since I have already shown you how to make the four-sided pyramids in an earlier blog, let me show you how to make a triangular pyramid.

Start With A Sheet of Paper

Fold the right hand side to the left but do not crease it all the way to the top. Just press on the bottom of the paper to create a crimp mark.

Then take the right hand side and bring it in to the crimp mark. You are now going to make another crimp mark a third of the way up the right side.

Now use the bottom crimp mark as a hinge and fold the bottom left hand side up to touch the crimp mark that is about a third of the way up the paper. Set the crease.

Then bring the other side up to the diagonal edge of the first side so the paper has an airplane point at the bottom.

Now to the Cutting

Take a pair of scissors and make a horizontal cut from the top of the fold on the right hand side all the way go the left.

Now open the paper and cut off the side panels and you have an equal-sided triangle.

Helpful Hint: Save the Side Panels to Make Smaller Pyramids

Now to Fold From 2-D to 3-D

Take the triangle and fold the bottom right hand side to the left and crease. Twist the triangle to the right and repeat two more times. Thus will divide the pyramid in half three ways and create a crease mark for a reference for further folding.

Now Let’s Get to the Point

We are going to fold an airplane point on each of the three points of the triangle.

Back to the Top

After folding the point, bring the sharp end back down to the blunt end and set a dark crease. Repeat this on each point. Hint: Don’t forget to fold end to end on the last point even though from the top it looks like it has already been folded. The crease is only on one layer and needs to travel to all levels. Easy way to check it: Look in the center of the large triangle and you should see a small triangle in the creases in the middle of the paper. If one side of the smaller triangle is missing that indicates the point that still needs to be folded back from sharp to blunt end.

This Will Do In a Pinch

Open up your folds and pinch the middle of each of the three sides. It should pop up to look like this:

You Are Now Ready for Glue

To finish the pyramid you need to add glue. Hint: A little glue is better than a lot. Adjust your glue bottle so you can create a glue line about as thick as a pencil lead. A little glue will set almost immediately while more glue takes a lot longer to set as well as it oozes out and damages the appearance of the finished form. Apply a thin line of glue like in the following picture. The only part of the pyramid that touches is the edge.

Place glue between each of the three sides then carefully align the edges and bring them together into the pyramid form. Hold it firmly for about thirty seconds and the glue should be dry.

Finished Form

How to Use the Side Pieces

If you want to create some smaller pyramids you can take the side strips you cut off earlier and fold the point at the bottom to the top of the same side and it forms another pyramid. Just cut off the one side strip that remains. The pictures below show the process:


Interlocks Are Great For Legs

If you want to create long slender legs for your creatures you will have to learn to Interlock. If you take one pyramid and put it above another facing the opposite direction the two pyramids will fit together like the cogs on a gear. The gluing is a little more difficult but is done in the sane manner as before, only that you are using the surfaces of two pyramids to come together instead of one. An Interlock looks like this:

Now It’s Your Turn

By using the outer surfaces of each triangle for gluing tabs you can combine the pyramids in many ways to create your creatures. If you look at the two creatures in this post you can probably locate the interlocks and the standard pyramids. Now it’s time for you to try it. I would love to see what you create.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s